|
| Brand Name: | JERO |
| Model Number: | JA74 |
| MOQ: | 7 TONS |
| Price: | 2800-3200USD/TON |
| Payment Terms: | L/C,T/T,Western Union |
| Supply Ability: | 2,900 TONS PER MONTH |
Corrosion Resistance 5005 Aluminum Alloy Plate Used For Construction Material
5005 aluminum alloy is a medium-magnesium content (0.5-1.1%) non-heat-treatable 5xxx
series alloy, offering excellent corrosion resistance, good formability, and weldability. Its low-
copper composition makes it particularly suitable for humid or chemical environments, while
maintaining superior surface treatment capabilities (e.g., anodizing).
Properties of 5005 Aluminum Coil
Composition:
Primary alloying element: Magnesium (Mg, 0.5–1.1%), with trace manganese (Mn ≤0.2%).
Low copper (Cu ≤0.2%) and iron (Fe ≤0.7%), ensuring excellent corrosion resistance.
Mechanical Properties (H32 temper example):
Tensile strength: 145–185 MPa
Yield strength: ≥115 MPa
Elongation: ≥5%
Physical Characteristics:
Density: 2.7 g/cm³ (similar to pure aluminum).
Conductivity: ~50% of pure aluminum (good for electrical/thermal applications).
Corrosion Resistance:
Outstanding in marine and industrial environments due to low Cu content.
Common Tempers
| Temper | Treatment Process | Characteristics & Applications |
| O | Annealed | Softest state; suited for deep forming. |
| H12 | Partially hardened (~25% CW) | Balanced strength/formability (general sheet metal). |
| H14 | Half-hard (~50% CW) | Moderate strength (architectural panels). |
| H32 | Stabilized (H22 + low-temp anneal) | Stress-corrosion resistant (outdoor use). |
| H34 | Hard (~75% CW) | Higher-strength parts (e.g., vehicle trim). |
Key Advantages
Superior Corrosion Resistance:
Outperforms copper-containing alloys (e.g., 2xxx/7xxx) in humid/chemical environments.
Excellent Formability:
Easily stamped, bent, or deep-drawn (O or H2x tempers).
Surface Treatment Compatibility:
Anodizes uniformly, ideal for decorative uses (e.g., architectural interiors).
Weldability:
Compatible with TIG/MIG welding; minimal strength loss post-welding.
Primary Applications
♦ Architecture:
Roofing/wall cladding (weather-resistant).
Ceilings, curtain walls (anodized for aesthetics).
♦ Transportation:
Marine interiors (saltwater-resistant), truck liners.
♦ Appliances & Electronics:
Refrigerator/AC panels, electronics enclosures.
♦ Packaging:
Food containers, caps (non-toxic + corrosion-resistant).
Company Advantages
1) Full sets of imported vertical intelligent storage and logistic management system, and finishing
lines which fulfill all the requirements on various kinds of Aluminium plate,sheet and strip products.
2) We have has built up on the basis of outstanding management and complete quality control system
under its rich experiences and has got many kinds of quality management certificates such as ISO90
-01:2015, ISO14001:2015,ISO45001:2018,IATF16949:2016,AS9100D,ISO/TS22163:2017, and has
passed ABS,CCS, DNVGL,LR,NK,KR etc.proof from National Classification Society.
3) We take social responsibility and regards environment protection as main task for long-term develop
-ment. It is featured with pulse-type bag dedust system from NEDERMAN Germany,which emission
index of main exhaust stuff and particles are lower than national criteria.
Our factory own the world advanced equipments, include:
| Code | Name | Brand |
| 1 | aluminum ignot melting furnace | GAUTSCHI (Switzerland) |
| 2 | 2800mm width single stand cold rolling mill | SMS Group (Germany) |
| 3 | 4 continuous hot rolling mills | SMS Group (Germany) |
| 4 | all automatic three-dimensional elevated warehouse | Dematic (USA) |
Address
NO.205 Zhengyang Road, Chengyang District, Qingdao,China
Tel
86-0532-8787-6524
